Making sure you have the supplies you need on hand is always important. Making sure you have the correct supplies is even more important! Make sure you have everything you need to operate and care for your DTF printer.
Bundle Deal Includes:
12oz DTFPRO White Ink
12oz DTFPRO Black Ink
12oz DTFPRO Cyan Ink
12oz DTFPRO Magenta Ink
12oz DTFPRO Yellow Ink
1.75lbs DTFPRO White Adhesive Powder
100 sheets A3+ (13"x19") DTFPRO Transfer Film
32oz (950ml) DTFPRO Printhead Cleaning Solution (for cleaning or flushing)
DTGPRO Printhead Maintenance Kit - for the maintenance of printheads (includes 100ml maintenance solution & accessories; used to put your printhead in "vacation mode")
50 Medium Sponge tip cleaning swabs
100 Small Sponge tip cleaning swabs
(Priced with a 10% discount under buying individually!)
NEW ITEM! Save time and effort on your routine maintenance!
Check out the new L1800 CISS in action here: https://youtu.be/6eOpYu_NnwM
Cleaner Concentrate makes 2 gallons of cleaner. You mix with distilled water at a 1-8 ratio. Instructions are on the bottle.
L1800, P600, P800 Cap Ink Waste Pad replacement- recommended to replace every 6 months to ensure a snug fit. Springs are not included.
Printhead Maintenance Kit - for the maintenance of printheads includes 100ml maintenance solution & accessories; used to put your printhead in "vacation mode" for up to 30 days. This is NOT a cleaner. It is a printhead protector and lubricant. Instructions are included.
Extreme Clean- 100ml Cleaner for ink tubing or as a last resort to unclog stubborn clogs in printheads. To be used for flushing of ink tubing (such as when you want to change out ink), or to unclog stubborn printhead clogs. For printhead cleaning, this XTREME cleaning solution is a last resort option, first try the regular Cleaning Solution for printheads, as this XTREME solution is a stronger formula. For flushing of ink tubing, or to unclog stubborn clogs in printheads. This solution is for use in resolving stubborn/extreme clogs, or to flush out inks from ink tubing (such as if you want to change out inks). Flush your print-heads with this solution (if your system is damper/CIS based), or fill it into "cleaning cartridges" and run up to 3 cleaning cycles with those cartridges (if your system is cartridge based). Do not use for wet capping.
New L1800 Printheads
All printheads have been tested, flushed and maintenance solution injected. Printheads are new but may show light rubs on face due to being tested and cleaned. The reddish solution that you may see on the nozzle or that comes out when installed is the maintain solution which keeps the heads lubricated in storage.
There are no warranty on printheads.