Making sure you have the supplies you need on hand is always important. Making sure you have the correct supplies is even more important! Make sure you have everything you need to operate and care for your DTF printer.
Bundle Deal Includes:
12oz DTFPRO White Ink
12oz DTFPRO Black Ink
12oz DTFPRO Cyan Ink
12oz DTFPRO Magenta Ink
12oz DTFPRO Yellow Ink
1.75lbs DTFPRO White Adhesive Powder
100 sheets A3+ (13"x19") DTFPRO Transfer Film
32oz (950ml) DTFPRO Printhead Cleaning Solution Concentrate (for cleaning or flushing)
DTGPRO Printhead Maintenance Kit - for the maintenance of printheads (includes 100ml maintenance solution & accessories; used to put your printhead in "vacation mode")
50 Medium Sponge tip cleaning swabs
100 Small Sponge tip cleaning swabs
(Priced with a 10% discount under buying individually!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NEW ITEM! Save time and effort on your routine maintenance!
Check out the new L1800 CISS in action here: https://youtu.be/6eOpYu_NnwM
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cleaner Concentrate makes 2 gallons of cleaner. You mix with distilled water at a 1-8 ratio. Instructions are on the bottle.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
L1800, P600, P800 Cap Ink Waste Pad replacement- recommended to replace every 6 months to ensure a snug fit. Springs are not included; includes 1 pad only
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Printhead Maintenance Kit - for the maintenance of printheads includes 100ml maintenance solution & accessories; used to put your printhead in "vacation mode" for up to 30 days. This is NOT a cleaner. It is a printhead protector and lubricant. Instructions are included.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extreme Clean- 100ml Cleaner for ink tubing or as a last resort to unclog stubborn clogs in printheads. To be used for flushing of ink tubing (such as when you want to change out ink), or to unclog stubborn printhead clogs. For printhead cleaning, this XTREME cleaning solution is a last resort option, first try the regular Cleaning Solution for printheads, as this XTREME solution is a stronger formula. For flushing of ink tubing, or to unclog stubborn clogs in printheads. This solution is for use in resolving stubborn/extreme clogs, or to flush out inks from ink tubing (such as if you want to change out inks). Flush your print-heads with this solution (if your system is damper/CIS based), or fill it into "cleaning cartridges" and run up to 3 cleaning cycles with those cartridges (if your system is cartridge based). Do not use for wet capping.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
New L1800 Printheads
All printheads have had maintenance solution injected. Printheads are new but may show light rubs on face due to being handled. The reddish to clear solution that you may see on the nozzle or that comes out when installed is the maintain solution which keeps the heads lubricated in storage.
There are no warranty on printheads.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Wet Cap Solution
For printhead wet capping only. This solution is for wet capping & short-term maintenance - to be used for saturating the printhead resting cap on the capping station at the end of the day, and not intended to be used as a cleaning or unclogging solution (use the Cleaning Solution or Xtreme Cleaning Solution for resolving clogs/cleaning purposes). For long-term maintenance (such as when you're going on vacation), use the Maintenance Solution instead.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Last Chance Cleaner
When everything else fails, use this solution as a LAST CHANCE effort to unclog the most stubborn of print head clogs! While there is no guarantee that an "uncloggable" clog can be undone, if you're down to the wire and feel like you need to replace your printhead, give this solution a chance - the LAST CHANCE solution by DTFPRO has saved countless printheads that were declared "dead" from the trash heap, could it save yours?
This solution is for use in attempting to resolve clogs in printheads that are considered "dead" or un-revivable due to the most extreme of clogs, or to flush inks from tubing that are also extremely clogged. DO NOT USE for wet capping. DO NOT LEAVE in the printhead (run a cleaning with regular DTFPRO cleaning solution after use).
Use of this solution needs to be complimented with a printhead cleaning / flush utilizing the DTFPRO regular cleaning solution AFTER use of the LAST RESORT solution. That is because while this LAST CHANCE cleaning solution can unclog extremely challenging clogs, it should not remain in the printheads as it should not mix with your inks. Once you have resolved your clog with the LAST CHANCE cleaning solution, you need to run an extra cleaning/flush with the DTFPRO regular cleaning solution before inserting inks back into the printer.